What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 28.06.2025 10:21
(Dc diagram shown, AC is similar).
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
what exactly is a ‘surge’ protector?
How do you start a tech startup as a non-technical person?
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
[old diagram got deleted by accident]
There are two important concepts here.
Amanda Seyfried, Adam Brody on Parenting, Jennifer's Body and More - Variety
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Steven Spielberg will introduce a ‘Jaws’ 50th anniversary special - CNN
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
but this device (an Inductor) … impedes the rapid changes in the current.
The Best Father's Day Gift Ideas for Every Type of Dad - IGN
but I think this circuit , shows a few more pieces.
He then describes the function of a fuse.
But it can get overloaded, and no longer works.
Two former Polygon writers are starting a new site - The Verge
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
I post the exact comment here.
so, what happens?
What does a fuse do?
One
What are the latest trends in artificial intelligence for 2025?
2024–10–16 [ OO OLAOYE OYEBODE ]
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
eight
It also is a device that limits the change in current flow.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
Can you share summer photos? Day 8
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
These are simplified answers to the original question, and does not change anything I wrote above.
Shark Attack: “Jaws” Remains as Entertaining as It Was 50 Years Ago - Roger Ebert
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
How would you describe modern day Russian society, beyond just politics?
This one hit behind the barn.
This is where this question deviates from being a 'generic' question, and becomes more specific.
This device then solves the entire problem.
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
2024–10–14 [Omar Gharbi Omar Gharbi ]
The other is “what does a “fuse” do?”
So, the voltage could go up to 500 volts, and the fuse will not open up.
the problem then depends on "how fast does the fuse operate?".
First Sentence:
A fuse is a non-resetable over current circuit protector.
What is lightning?
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
Now when you have a certain ac resistance, then a current flows in a loop.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
He then describes Rainy Season and Lightning.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
A circuit breaker is similar, but is resettable.
In schematic diagrams this is the symbol for a fuse:
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Edit 2024–10.
He then asserts :
Upvotes:
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
But… the neutral is now “floating” because of the 1 ohm resistance.
[image of Common-mode choke]
This is the picture of an electronic coil of wire wound around a core of magnetic material.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
One is “what exactly is in a ‘surge protector’ ? ”
An AC voltage/ current source, and an ac inductive load.
nine
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
Here is a simplified AC power diagram.
Barnstars:
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–10[John johnson John Johnson ]
The third is lightning and “how it gets conducted into a home.”
a photo is worth a thousand words.
At least they know the answer if they wanted it.
These devices are installed between the “hot” and “neutral” and protective ground.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
The bolt then partially travels down the line to your home.
This is where the MOV conducts again, and dissipated the energy.
It seems Mohan does not understand the difference between a comment and an Answer.
This is 'the assistant's answer'
Because the load is inductive, the current lags the voltage.(by a bit).
For this case there are devices called Metal oxide varistors (MOV).
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
The MOV will conduct when the voltage exceeds 50% of line voltage.